Chapter 7: Using the Web Interface
Use the NTP server
▪ Select "Synchronize with NTP server."
▪ There are two ways to assign the NTP servers:
▪
To use the DHCP-assigned NTP servers, DO NOT enter any NTP servers for the First and
Second time server.
DHCP-assigned NTP servers are available only when either IPv4 or IPv6 DHCP is enabled.
▪
To use the manually-specified NTP servers, specify the primary NTP server in the "First
time server" field. A secondary NTP server is optional.
Click Check NTP Servers to verify the validity and accessibility of the manually-specified
NTP servers.
372
5.
Click Save.
PX3TS follows the NTP server sanity check per the IETF RFC. If your PX3TS has
problems synchronizing with a Windows NTP server, see
Synchronization Solution
(on page 374).
Windows NTP Server