DHCP IPv6 Configuration in Linux
IPv4 illustration example in dhcpd.conf:
Modify the "dhcpd6.conf" file for IPv6 settings when your DHCP server is
running Linux.
Required Linux IPv6 settings in DHCP:
1.
Locate and open the "dhcpd6.conf" file of the DHCP server.
2.
The PX3TS will provide the following values to the "vendor-class" option
(option 16). Configure related settings in DHCP accordingly.
▪
13742 (Raritan's IANA number)
▪
Raritan PDU 1.0
▪
15 (the length of the above string "Raritan PDU 1.0")
3.
Set the following three sub-options in the "vendor-opts" (option 17).
▪
code 1 (pdu-tftp-server) = the TFTP server's IPv6 address
▪
code 2 (pdu-update-control-file) = the name of the control file
"fwupdate.cfg"
Appendix D: Bulk Configuration or Firmware Upgrade via DHCP/TFTP
767