LEGRAND Raritan PX3TS User Manual page 614

Chapter 9: Using the Command Line Interface
594
Configuring the Cascading Mode
This command determines the cascading mode.
config:# network <mode> enabled <option1>
Variables:
•
<mode> is one of the following cascading modes.
Mode
bridge
portForwarding
Important: When enabling either cascading mode, you must make sure the
other cascading mode is disabled, or the preferred cascading mode may not
be enabled successfully.
•
<option1> is one of the following options:
Option
true
false
Description
The Bridging mode, where each cascaded
device is assigned a unique IP address.
The Port Forwarding mode, where every
cascaded device in the chain shares the same
IP address, with diverse port numbers
assigned.
Description
The selected cascading mode is enabled.
The selected cascading mode is disabled.