LEGRAND Raritan PX3TS User Manual page 529

•
Configure the door handles connected to DX2-DH2C2. You must set this
because PX3TS cannot detect the types of connected door handles.
•
Control the door handles connected to DX2-DH2C2.
To configure the door handles:
There are two door handle sections per DX2-DH2C2 because a DX2-DH2C2 has
two door handle ports. Before you configure the connected door handle(s), a
lock icon is displayed on each door handle section's top-right corner, and both
the Door State and Card Reader sections are unavailable.
1. Click Edit Settings in the Settings section.
2. In the 'Door handle type' field, select the door handle type you are using.
▪
If your specific Southco H3-EM model is listed, select it. For all other
supported Southco H3-EM models, select "Southco H3-EM".
3. Make changes to the remaining fields as needed.
Chapter 7: Using the Web Interface
509