LEGRAND Raritan PX3TS User Manual page 627

Type apply for the selected time zone to take effect.
3.
Setting the Automatic Daylight Savings Time
This command determines whether the daylight saving time is applied to the
time settings.
config:# time autoDST <option>
Variables:
•
<option> is one of the options: enable or disable.
Mode Description
enable Daylight savings time is enabled.
disable Daylight savings time is disabled.
Examples
This section illustrates several time configuration examples.
Example 1 - Time Setup Method
The following command sets the date and time settings by using the NTP
servers.
config:# time method ntp
Example 2 - Primary NTP Server
The following command sets the primary time server to 192.168.80.66.
config:# time ntp firstServer 192.168.80.66
Chapter 9: Using the Command Line Interface
607