LEGRAND Raritan PX3TS User Manual page 684

Chapter 9: Using the Command Line Interface
664
Type Description
smokeDetection The connected detector/switch is for detection of the
smoke presence.
waterDetection The connected detector/switch is for detection of the
water presence.
vibration The connected detector/switch is for detection of the
vibration.
Setting the X Coordinate
This command specifies the X coordinate of an environmental sensor.
config:# externalsensor <n> xlabel "<coordinate>"
Variables:
•
<n> is the ID number of the environmental sensor that you want to
configure. The ID number is available in the PX3TS web interface or using
the command "show externalsensors <n>" in the CLI. It is an integer
starting at 1.
•
<coordinate> is a string comprising up to 24 ASCII printable characters, and
it must be enclosed in quotes.
Setting the Y Coordinate
This command specifies the Y coordinate of an environmental sensor.
config:# externalsensor <n> ylabel "<coordinate>"
Variables:
•
<n> is the ID number of the environmental sensor that you want to
configure. The ID number is available in the PX3TS web interface or using
the command "show externalsensors <n>" in the CLI. It is an integer
starting at 1.
•
<coordinate> is a string comprising up to 24 ASCII printable characters, and
it must be enclosed in quotes.