LEGRAND Raritan PX3TS User Manual page 534

Chapter 7: Using the Web Interface
514
When a user scans his/her smart card with the card reader, PX3TS will retrieve
the card's type and ID and show them in the corresponding Card Type and Card
ID column. If no data is shown in the two columns, it means the scanned card
may not be supported by the card reader.
Tip: You can use a third-party application, such as Power IQ, to retrieve the
card's data from PX3TS to perform security features like cabinet access control.
Refer to that application's user documentation for more information.
Listed card readers can be one or both of the following types.
Door handle-integrated card readers:
•
This type of card reader is integrated in the door handle, which is any
series below:
▪
Emka Agent E
▪
SouthCo H3-EM
▪
Dirak eLine MLR 2x00
Note: Not every SouthCo H3-EM door handle has a card reader integrated.
For example, H3-EM-60-100 requires an external card reader.
•
It is connected to PX3TS via the DX2-DH2C2 module.
•
The Channel column indicates which door handle port (channel) it is
connected to.
•
Note that the serial number displayed for this card reader is the same as
DX2-DH2C2's serial number.
Each DX2-PD2C2 module can show two card readers because they have
two ports for connecting two door handles with card readers integrated.
Standalone USB card readers:
•
It is directly connected to the USB-A port of PX3TS.
•
The Channel column does not show any data.