Actuator Information - LEGRAND Raritan PX3TS User Manual

Actuator Information

This command syntax shows an actuator's information.
# show actuators <n>
To show detailed information, add the parameter "details" to the end of the
command.
# show actuators <n> details
Variables:
•
<n> is one of the options: all, or a number.
Option Description
all Displays the information for all actuators.
Tip: You can also type the command without adding
this option "all" to get the same data.
A specific Displays the information for the specified actuator
actuator only.
number*
* The actuator number is the ID number assigned to the actuator. The ID
number can be found using the PX3TS web interface or CLI. It is an integer
starting at 1.
Displayed information:
•
Without the parameter "details," only the actuator ID, type and state are
displayed.
•
With the parameter "details," more information is displayed in addition to
the ID number and actuator state, such as the serial number and X, Y, and
Z coordinates.
Chapter 9: Using the Command Line Interface
543