LEGRAND Raritan PX3TS User Manual page 638

Chapter 9: Using the Command Line Interface
config:# security userBlocking maximumNumberOfFailedLogins <value1>
618
Password Aging Interval
This command determines how often the password should be changed.
config:# security loginLimits passwordAgingInterval <value>
Variables:
•
<value> is a numeric value in days set for the password aging interval. The
interval ranges from 7 to 365 days.
Idle Timeout
This command determines how long a user can remain idle before that user is
forced to log out of the PX3TS web interface or CLI.
config:# security loginLimits idleTimeout <value>
Variables:
•
<value> is a numeric value in minutes set for the idle timeout. The timeout
ranges from 1 to 1440 minutes (24 hours).
User Blocking
There are different commands for changing different user blocking parameters.
These commands begin with security userBlocking.
You can combine multiple commands to modify the user blocking parameters
at a time. See Multi-Command Syntax
Determine the maximum number of failed logins before blocking a user:
Determine how long a user is blocked:
config:# security userBlocking blockTime <value2>
Variables:
•
<value1> is an integer between 3 and 10, or unlimited, which sets no limit
on the maximum number of failed logins and thus disables the user
blocking function.
•
<value2> is a numeric value ranging from 1 to 1440 minutes (one day), or
infinite, which blocks the user all the time until the user is unblocked
manually.
(on page 695).