LEGRAND Raritan PX3TS User Manual page 674

Chapter 9: Using the Command Line Interface
config:# authentication ldap add <host> <port> <ldap_type> <security>
<bind_type> <base_DN> <login_name_att> <user_entry_class> adDomain
<AD_domain>
config:# authentication ldap add <host> <port> <ldap_type> <security>
<bind_type> <base_DN> <login_name_att> <user_entry_class> bindDN
<bind_DN>
Parameters
userSearchSubfilter <filter>
bindDN <bind_DN>
adDomain <AD_domain>
654
•
<bind_type> is one of the bind options: anonymouseBind, or
authenticatedBind.
Type
anonymousBind
authenticatedBind
•
<base_DN> is the base DN for search.
•
<login_name_att> is the login name attribute.
•
<user_entry_class> is the User Entry Object Class.
Optional Parameters
You can add one or multiple "optional parameters", such as specifying the Bind
DN or certificate upload, to an LDAP-server-adding command as illustrated
below. If adding multiple optional parameters, you must add them to the END
of the command and separate them with a space.
▪
Example 1 -- Specify an Active Directory Domain's name:
▪
Example 2 -- Set up the bind DN:
"Optional Parameters" table:
Description
Enable the anonymous Bind.
Bind DN and password are NOT required.
Enable the Bind with authentication.
Bind DN and password are required.
To configure
User search subfilter
bind DN
▪ The system will prompt you to enter and
re-confirm the bind password after adding
this parameter to the command.
▪ For details, see
Illustrations of Adding LDAP
Servers (on page 655).
Active Directory Domain name