Outlet Group Configuration Commands - LEGRAND Raritan PX3TS User Manual

Setting an Outlet's Cycling Power-Off Period
This section applies to outlet-switching capable models only.
This command determines the power-off period of the power cycling operation
for a specific outlet.
config:# outlet <n> cyclingPowerOffPeriod <timing>
Variables:
•
<n> is the number of the outlet that you want to configure.
•
<timing> is the time of the cycling power-off period in seconds, which is an
integer between 0 and 3600, or pduDefined for following the PDU-defined
timing.
Note: This setting overrides the PDU-defined cycling power-off period on a
particular outlet. See Setting the PDU-Defined Cycling Power-Off Period
page 572).
Example - Outlet Naming
The following command assigns the name "Win XP" to outlet 8.
config:# outlet 8 name "Win XP"

Outlet Group Configuration Commands

An outlet group configuration command begins with outletgroup. Such a
command allows you to configure or operate an outlet group.
Creating an Outlet Group
This command creates a new outlet group.
config:# outletgroup add "<name>" <members>
Variables:
•
<name> is a string comprising up to 64 ASCII printable characters. The
<name> variable must be enclosed in quotes when it contains spaces.
Tip: PX3TS allows you to assign the same name to diverse outlet groups. If
this really occurs, you still can identify different groups through their
unique index numbers.
Chapter 9: Using the Command Line Interface
(on
631