Setting Default Measurement Units - LEGRAND Raritan PX3TS User Manual

Chapter 7: Using the Web Interface
306
Field
Length unit
Pressure unit
3. Click Save.

Setting Default Measurement Units

Default measurement units are applied to all PX3TS user interfaces across all
users, including users accessing the PX3TS via external authentication servers.
For a list of affected user interfaces, see
(on page 307). The front panel display also shows the default measurement
units.
Note: The preferred measurement units set by any individual user or by the
administrator on a per-user basis will override the default units in the web
interface and command line interface. See
Measurement Units (on page 305) or
To set up default user preferences:
1. Click User Management > Default Preferences.
2. Make changes as needed.
Field
Temperature unit
Length unit
Pressure unit
3. Click Save.
Description
Preferred units for length or height -- Meter or Feet.
Preferred units for pressure -- Pascal or Psi.
▪ Pascal = one newton per square meter
▪ Psi = pounds per square inch
User Interfaces Showing Default Units
Setting Your Preferred
Creating Users
Description
Preferred units for temperatures --
(Fahrenheit).
Preferred units for length or height -- Meter or Feet.
Preferred units for pressure -- Pascal or Psi.
▪ Pascal = one newton per square meter
▪ Psi = pounds per square inch
(on page 297).
(Celsius) or