Existing User Profiles
This command shows the data of one or all existing user profiles.
#
show user <user_name>
To show detailed information, add the parameter "details" to the end of the
command.
#
show user <user_name> details
Variables:
•
<user_name> is the name of the user whose profile you want to query. The
variable can be one of the options: all or a user's name.
Option
all
a specific user's name
Displayed information:
•
Without the parameter "details," only four pieces of user information are
displayed: user name, user "Enabled" status, SNMP v3 access privilege, and
role(s).
•
With the parameter "details," more user information is displayed, such as
the telephone number, e-mail address, preferred measurement units and
so on.
Chapter 9: Using the Command Line Interface
Description
This option shows all existing user profiles.
Tip: You can also type the command without
adding this option "all" to get the same data.
This option shows the profile of the specified
user only.
551