LEGRAND Raritan PX3TS User Manual page 402

Chapter 7: Using the Web Interface
Event/context
Asset Management > Firmware
Update
Asset Management > Device
Config Changed
Asset Management > Rack Unit
Config Changed
Asset Management > Blade
Extension Overflow
Asset Management > Composite
Asset Strip Composition Changed
Card Reader Management > Card
Reader > * > Card inserted
Card Reader Management > Card
Reader attached
Card Reader Management > Card
Reader detached
Card Reader Management > Card
Reader > * > Card removed
Device > System started
Device > System reset
Device > Firmware validation
failed
Device > Firmware update started
382
Default message when the event = TRUE
Firmware update for asset strip
[AMSNUMBER] ('[AMSNAME]'): status
changed to '[AMSSTATE]'.
Config parameter '[CONFIGPARAM]' of
asset strip [AMSNUMBER] ('[AMSNAME]')
changed to '[CONFIGVALUE]' by user
'[USERNAME]'.
Config of rack unit
[AMSRACKUNITPOSITION] of asset strip
[AMSNUMBER] ('[AMSNAME]') changed
by user '[USERNAME]' to: Name
'[AMSRACKUNITNAME]', LED Operation
Mode '[AMSLEDOPMODE]', LED Color
'[AMSLEDCOLOR]', LED Mode
'[AMSLEDMODE]
Blade extension overflow occurred on
strip [AMSNUMBER] ('[AMSNAME]').
Composition changed on composite asset
strip [AMSNUMBER] ('[AMSNAME]').
Card of type '[SMARTCARDTYPE]' with ID
'[SMARTCARDID]' inserted at Card Reader
'[CARDREADERID]'.
Card Reader with id '[CARDREADERID]'
disconnected.
Card of type '[SMARTCARDTYPE]' with ID
'[SMARTCARDID]' inserted.
Card of type '[SMARTCARDTYPE]' with ID
'[SMARTCARDID]' removed at Card Reader
'[CARDREADERID]'.
System started.
System reset performed by user
'[USERNAME]' from host '[USERIP]'.
Firmware validation failed by user
'[USERNAME]' from host '[USERIP]'.
Firmware upgrade started from version
'[OLDVERSION]' to version '[VERSION]' by
user '[USERNAME]' from host '[USERIP]'.
Default message when the event =
FALSE
Blade extension overflow cleared for
strip [AMSNUMBER] ('[AMSNAME]').