LEGRAND Raritan PX3TS User Manual page 609

Setting the SSID
This command specifies the SSID string.
config:# network wireless SSID <ssid>
Variables:
•
<ssid> is the name of the wireless access point, which consists of:
- Up to 32 ASCII characters
- No spaces
- ASCII codes 0x20 ~ 0x7E
Setting the Wireless Authentication Method
This command sets the wireless authentication method to either PSK or
Extensible Authentication Protocol (EAP).
config:# network wireless authMethod <method>
Variables:
•
<method> is one of the authentication methods: PSK or EAP.
Method Description
PSK The authentication method is set to PSK.
EAP The authentication method is set to EAP.
Setting the PSK
If the Pre-Shared Key (PSK) authentication method is selected, you must assign
a PSK passphrase by using this command.
config:# network wireless PSK <psk>
Variables:
•
<psk> is a string or passphrase that consists of:
- 8 to 63 characters
- No spaces
- ASCII codes 0x20 ~ 0x7E
Chapter 9: Using the Command Line Interface
589