config:#
sensor ocp 2 current upperWarning enable upperCritical 16
Example 1 - Upper Critical Threshold for a Temperature Sensor
The following command sets the Upper Critical threshold of the environmental
"temperature" sensor with the ID number 2 to 40 degrees Celsius. It also
enables the upper critical threshold if this threshold has not been enabled yet.
config:#
sensor externalsensor 2 temperature upperCritical 40
Example 3 - Upper Thresholds for Overcurrent Protector Sensors
The following command sets both the Upper Critical and Upper Warning
thresholds for the 2nd overcurrent protector.
Results:
•
The Upper Critical threshold for the 2nd overcurrent protector's RMS
current is set to 16A. It also enables the upper critical threshold if this
threshold has not been enabled yet.
•
The Upper Warning threshold for the 2nd overcurrent protector's RMS
current is enabled.
Chapter 9: Using the Command Line Interface
679