Individual Sensor/Actuator Pages - LEGRAND Raritan PX3TS User Manual

Individual Sensor/Actuator Pages

A sensor's or actuator's data/setup page is opened after clicking any sensor or
actuator name on the Peripheral Devices page. See
Note that only a numeric sensor has threshold settings, while a state sensor or
actuator has no thresholds.
Threshold settings, if enabled, help you identify whether any numeric sensor
enters the warning or critical level. See
page 264). In addition, you can have PX3TS automatically generate alert
notifications for any warning or critical status. See
page 375).
To configure a numeric sensor's threshold settings:
1. Click Edit Thresholds.
Tip: The date and time shown on the PX3TS web interface are
automatically converted to your computer's time zone. To avoid time
confusion, it is suggested to apply the same time zone settings as those of
PX3TS to your computer or mobile device.
Chapter 7: Using the Web Interface
Peripherals (on page 258).
Yellow- or Red-Highlighted Sensors
Event Rules and Actions
(on
(on
273