LEGRAND Raritan PX3TS User Manual page 415

Note: The "Change load shedding state", "Power control server", "Switch
outlets" and "Switch outlet group" options are only available for
outlet-switching capable models.
Action
Alarm
Change load shedding
state
Execute an action
group
External beeper
Internal beeper
Log event message
Power control server
Push out sensor
readings
Record snapshots to
webcam storage
Chapter 7: Using the Web Interface
Function
Requires the user to acknowledge the alert after it
is generated. If needed, you can have the alert
notifications regularly generated until a person
takes the acknowledgment action. See
page 397).
Enters or quits the load shedding mode. See
Change Load Shedding State
Creates a group of actions comprising existing
actions. See Action Group
Enables or disables the connected external beeper,
or causes it to enter an alarm cycle. See
Beeper (on page 399).
Turns on or off the internal beeper. See
Beeper (on page 399).
Records the selected events in the internal log. See
Log an Event Message (on page 400).
Two operations are available.
▪ Shuts down a monitored server and then
powers off the outlet(s) associated with that
server.
▪ Powers up the outlet(s) associated with a
monitored server.
See Shut down a Server and Control its Power
page 400).
Sends internal sensor log, environmental sensor log
or asset management strip data to a remote server
using HTTP POST requests. See
Readings (on page 401).
Makes a connected webcam start or stop taking
snapshots. See Record Snapshots to Webcam
Storage (on page 401).
Alarm (on
(on page 398).
(on page 398).
External
Internal
(on
Push Out Sensor
395