LEGRAND Raritan PX3TS User Manual page 452

Chapter 7: Using the Web Interface
432
Sample Inlet-Level Event Rule
In this example, we want the PX3TS to send SNMP notifications to the SNMP
manager for any sensor change event of the Inlet I1.
The event rule involves:
•
Event: Inlet > Sensor > Any sub-event
•
Action: System SNMP Notification Action
To create the above event rule:
1. For an event at the inlet level, select "Inlet" in the Event field.
2. Select "Sensor" to refer to sensor-related events.
3. Select "Any sub-event" to include all events related to all sensors of this
inlet and all thresholds, such as current, voltage, upper critical threshold,
upper warning threshold, lower critical threshold, lower warning threshold,
and so on.
4. To make the PX3TS send SNMP notifications, select "System SNMP
Notification Action" in the 'Available actions' box.
Note: The SNMP notifications may be SNMP v2c or SNMP v3 traps/informs,
depending on the settings for the System SNMP Notification Action. See
Enabling and Configuring SNMP
Then the SNMP notifications are sent when:
▪
Any numeric sensor's reading enters the warning or critical range.
▪
Any sensor reading or state returns to normal.
▪
Any sensor becomes unavailable.
(on page 515).