LEGRAND Raritan PX3TS User Manual page 41

Saving User Credentials for PDView's Automatic Login
When PDView detects PX3TS for the "first" time, it automatically attempts to
log in with the factory-default user credentials -- admin (user name) and raritan
(password).
If you have modified the factory-default user credentials, PDView's automatic
login fails and the login screen displays for you to manually enter user
credentials.
To make automatic login work again, you can save the modified admin
credentials or any custom user credentials in PDView. A maximum of 5 user
credentials can be saved, and PDView will try these credentials one by one until
the login succeeds.
The following procedure illustrates iPad only, but the procedure applies to any
iOS or Android mobile devices.
To save user credentials in PDView:
1. Make sure your mobile device is NOT connected to the PX3TS so that
PDView does NOT perform the automatic login feature after it is launched.
2. Launch PDView on your mobile device.
3. Tap the top-right icon
4. The user credentials setup page opens.
Chapter 3: Initial Installation and Configuration
(iOS) or (Android).
21