Control Push Buttons - LEGRAND Raritan PX3TS User Manual

Control Push Buttons

Indicator lamps Meaning when the lamp is on
Overload Power to load is turned off due to a short circuit.
See
The PX3TS provides three buttons on the front panel to perform manual
transfer or verify the transfer switch indicator lamps.
The table describes each button's function.
Button Description
Alarm Override Forces a manual transfer during an alarm condition.
See
114).
Turns on all transfer switch indicator lamps. Power Quality
Lamp Test
LEDs turn orange.
See
Manual Transfer Transfers power to the other inlet. Newly-activated inlet
becomes the preferred inlet.
See
Short Circuit Detection (on page 120).
Manual Transfer When an Alarm is Present
Testing Indicator Lamps
Manual Transfer (on page 112).
Chapter 6: Using the PX3TS
(on page
(on page 120).
119