Table of Contents
Advertisement
ADVANCED OPERATION
Groups
Use a LightSense™ Wireless PSWS Switch in conjunction with one or more
LightSense Wireless PSWCS Multilocation Controllers to control one non-
dimmable lighting circuit from multiple locations. Binding the PSWS and
PSWCS devices together in the same Group enables them to work in exactly
the same way, from any control location.
You can include other Wireless LightSense devices in the Group. Just
remember that all devices in the Group operate when one member operates.
Set the House ID (see Set House ID) before setting up Groups.
1. Go to any device that you want to include in the Group. Press
device LED flashes yellow, and all other devices in the House flash green.
You now have 5 minutes to complete this process.
2. To include or exclude a device in the Group press
LED changes color. Yellow flashing LED = Included in the Group
If you get to a device and it is NOT flashing, the 5 minute binding process
timer may have expired. Go back to step 1 and repeat.
3. Return to the device used in step 1 and press
All LEDs turn solid green.
dding a Switch to a Group in an Existing System
1. Go to a device that is in the existing Group where you want to add the
switch. Press
The new switch flashes green.
2. Press
on the new switch until its LED flashes yellow.
3. Return to the device used in step 1 and press
Deleting a Switch from a Group in an Existing System
1. Go to a device other than the one you're deleting that is in the existing
Group. Press
2. Press
on the switch you want to remove, until its LED flashes green.
3. Return to the device used in step 1 and press
Scene Control
The Wireless LightSense switch may be easily incorporated into room preset
and whole house preset scenes. The LightSense Installation Guide provides
more information about configuring scenes and presets.
Instructions for installation and use are included with the relevant LightSense
wireless room and whole house control devices. Application support information
and the LightSense Installation Guide is available at www.passandseymour.com.
Call 800.223.4185 for Technical Support
Green flashing LED = NOT included in the Group
. The device LED and all members of the Group flash yellow.
until the LED flashes yellow on each member of the Group.
. The
on the device until the
to terminate Group binding.
. All LEDs turn solid green.
. All LEDs turn solid green.
Advertisement
Table of Contents
