LEGRAND Raritan PX3TS User Manual page 361

2. Enable or disable "SNMP v1 / v2c" and/or "SNMP v3" by clicking the
corresponding checkbox.
▪
The SNMP v1/v2c read-only access is enabled by default. The default
'Read community string' is "public."
▪
To enable read-write access, type the 'Write community string.' Usually
the string is "private."
3. Enter the MIB-II system group information, if applicable.
▪
sysContact - the contact person in charge of the system
▪
sysName - the name assigned to the system
▪
sysLocation - the location of the system
4. To configure SNMP notifications:
a. Select the 'Enable SNMP notifications' checkbox.
b. Select a notification type -- SNMPv2c trap, SNMPv2c inform, SNMPv3
trap, and SNMPv3 inform.
c. Specify the SNMP notification destinations and enter necessary
information. For details, refer to:
▪
SNMPv2c Notifications
▪
SNMPv3 Notifications
Note: Any changes made to the 'SNMP Notifications' section on the SNMP
page will update the settings of the System SNMP Notification Action, and
vice versa. See Available Actions
SNMP destinations, you can create new SNMP notification actions. See
Send an SNMP Notification
5. You must download the SNMP MIB for your PX3TS to use with your SNMP
manager.
a. Click the Download MIBs title bar to show the download links.
b. Click the PDU2-MIB download link. See
page 520).
6. Click Save.
Chapter 7: Using the Web Interface
(on page 516)
(on page 517)
(on page 394). To add more than three
(on page 411).
Downloading SNMP MIB (on
341