LEGRAND Raritan PX3TS User Manual page 147

Section Information shown
This section indicates:
•
The Asset Strip mode if an asset strip has been connected
to the PX3TS.
•
The device's USB-cascading state - MASTER or SLAVE. If it
is a standalone device, neither MASTER nor SLAVE is
displayed.
Control Buttons
There are four control buttons.
•
Up and Down buttons for selecting a specific target, which can be an inlet,
overcurrent protector, environmental sensor or a device setting
•
MODE button for switching between various modes, including
- Inlet mode
- Overcurrent Protector mode
- Device mode
- Sensor mode
- Asset Sensor mode, indicated by the word ASSET, for showing the asset
sensor information
See Overview of the LCD Display
•
FUNC (Function) button for switching between different data of the
selected target, such as the current, voltage or power readings of an inlet
Operating the Character LCD Display
After powering on or resetting this product, the LCD display panel shows the
current reading of INLET 1 or OUTLET 1 by default before you select a different
target. The default target varies based on your model.
•
PX3TS-1000 series: INLET 1
•
PX3TS-5000 series: OUTLET 1
Chapter 6: Using the PX3TS
(on page 126).
127