Table of Contents
Advertisement
Chapter 9: Using the Command Line Interface
config:#
defaultThresholds <sensor type> hysteresis <hy_value>
config:#
defaultThresholds <sensor type> assertionTimeout <as_value>
668
Set the Default Assertion Timeout for a specific sensor type:
Variables:
•
<sensor type> is one of the following numeric sensor types:
Sensor types
absoluteHumidity
relativeHumidity
temperature
airPressure
airFlow
vibration
•
<value> is the value for the specified threshold of the specified sensor type.
Note that diverse sensor types use different measurement units.
Sensor types
absoluteHumidity
relativeHumidity
temperature
airPressure
airFlow
vibration
•
<hy_value> is the deassertion hysteresis value applied to the specified
sensor type.
•
<as_value> is the assertion timeout value applied to the specified sensor
type. It ranges from 0 to 100 (samples).
Description
Absolute humidity sensors
Relative humidity sensors
Temperature sensors
Air pressure sensors
Air flow sensors
Vibration sensors
Measurement units
g/m^3 (that is, g/m
)
3
%
Degrees Celsius (
) or Fahrenheit (
your measurement unit settings.
Pascal (Pa) or psi, depending on your measurement
unit settings.
m/s
g
), depending on
Advertisement
Table of Contents
Troubleshooting
