Backup And Restore Via Scp - LEGRAND Raritan PX3TS User Manual

Backup and Restore via SCP

3. The system copies the configuration included in the file "bulk_config.txt"
to another PX3TS, and displays the following message.
Starting restore operation. The connection will be
closed now.
SCP examples:
•
Save operation:
scp admin@192.168.87.50:/bulk_config.txt today_config.txt
•
Copy operation:
scp today_config.txt admin@192.168.87.47:/bulk_restore
Windows PSCP commands:
PSCP in Windows works in a similar way to the SCP.
•
Save operation:
pscp <user name>@<device ip>:/bulk_config.txt today_config.txt
•
Copy operation:
pscp today_config.txt <user name>@<device ip>:/bulk_restore
Alternative of bulk configuration via SCP:
Both methods of uploading 'bulk configuration' file or 'raw configuration' file
via SCP can serve the purpose of bulk configuration. The only difference is that
you can configure device-specific settings with the upload of raw configuration
but not with the 'bulk configuration' file.
•
Uploading or Downloading Raw Configuration Data
To back up ALL settings of a PX3TS, including device-specific settings, you
should perform the backup operation instead of the bulk configuration.
You can restore all settings to previous ones after a backup file is available.
To back up the settings via SCP:
1. Type the following SCP command and press Enter.
scp <user name>@<device ip>:/backup_settings.txt
▪
<user name> is the "admin" or any user profile with Administrator
Privileges
Chapter 10: Using SCP Commands
(on page 716)
713