Sensor/Actuator Location Example - LEGRAND Raritan PX3TS User Manual

Chapter 7: Using the Web Interface
278
Note: Per default you can turn on as many dry contact actuators as you want,
but only one "powered dry contact" actuator can be turned on at the same time.
To change this limitation of "powered dry contact" actuators, modify the active
powered dry contact setting. See
Other operations:
You can go to another sensor's or actuator's data/setup page by clicking the
selector on the top-left corner.

Sensor/Actuator Location Example

Use the X, Y and Z coordinates to describe each sensor's or actuator's physical
location in the data center. See
273).
The X, Y and Z values act as additional attributes and are not tied to any specific
measurement scheme. Therefore, you can use non-measurement values.
Example:
X = Brown Cabinet Row
Y = Third Rack
Z = Top of Cabinet
Peripherals (on page 258).
Individual Sensor/Actuator Pages (on page