Table of Contents
Advertisement
To add an outlet group:
1.
On the Outlet Groups page, click
displays, defaulting to the outlets in the master unit.
2.
Type a name for the new outlet group.
3.
Select individual member outlets for the master as shown in the default
page, or to select all outlets for the master, select My PDU (1).
4.
To select individual member outlets for the link unit My PDU (2), click Add
Outlets. To select all outlets for the link unit, select My PDU (2). Note: Link
units have to be selected by name to display their outlets.
5.
Click Save.
The following example shows the outlet group named "TEST 1" with all
outlet members selected for the master unit and outlet members 1-6
selected for the link unit.
Chapter 5: PDU Linking
. The New Outlet Group page
99
Advertisement
Table of Contents
Troubleshooting
