LEGRAND Raritan PX3TS User Manual page 646

Chapter 9: Using the Command Line Interface
config:# security roleBasedAccessControl ipv6 rule modify <rule_number>
startIpAddress <start_ip> endIpAddress <end_ip> role <role> policy <policy>
config:# security roleBasedAccessControl ipv4 rule delete <rule_number>
config:# security roleBasedAccessControl ipv6 rule delete <rule_number>
626
Variables:
•
<rule_number> is the number of the existing rule that you want to modify.
•
<start_ip> is the starting IP address.
•
<end_ip> is the ending IP address.
•
<role> is one of the existing roles.
•
<policy> is one of the options: allow or deny.
Policy Description
allow Accepts traffic from the specified IP address range
when the user is a member of the specified role
deny Drops traffic from the specified IP address range when
the user is a member of the specified role
Deleting a Role-Based Access Control Rule
These commands remove a specific rule from the list.
IPv4 commands
IPv6 commands
Variables:
•
<rule_number> is the number of the existing rule that you want to
remove.