Appendix Gldap Configuration Illustration; Step A. Determine User Accounts And Roles - LEGRAND Raritan PX3TS User Manual

Appendix G

Step A. Determine User Accounts and Roles

LDAP Configuration Illustration
This section provides an LDAP example for illustrating the configuration
procedure using Microsoft Active Directory
authentication, four main steps are required:
a. Determine user accounts and roles (groups) intended for the PX3TS
b. Create user groups for the PX3TS on the AD server
c. Configure LDAP authentication on the PX3TS
d. Configure roles on the PX3TS
Important: Raritan disables SSL 3.0 and uses TLS due to published security
vulnerabilities in SSL 3.0. Make sure your network infrastructure, such as
LDAP and mail services, uses TLS rather than SSL 3.0.
In This Chapter
Step A. Determine User Accounts and Roles .................................................... 777
Step B. Configure User Groups on the AD Server ............................................. 778
Step C. Configure LDAP Authentication on the PX3TS ...................................... 779
Step D. Configure Roles on the PX3TS .............................................................. 782
Determine the user accounts and roles (groups) that are authenticated for
accessing the PX3TS. In this example, we will create two user roles with
different permissions. Each role (group) will consist of two user accounts
available on the AD server.
User roles
PX_User
PX_Admin
Group permissions:
•
The PX_User role will have neither system permissions nor outlet
permissions.
•
The PX_Admin role will have full system and outlet permissions.
(AD). To configure LDAP
®
User accounts (members)
usera
pxuser2
userb
pxuser
777