LEGRAND Raritan PX3TS User Manual page 459

▪
Asset management tag log: Transmit the log of all asset strips, which is
generated when there are changes made to asset tags and asset strips,
including asset tag connection or disconnection events.
▪
Sensor log: Transmit the record of all logged sensors, including their
sensor readings and/or status. Logged sensors refer to all internal
and/or environmental sensors/actuators that you have selected on
the Data Logging page. See
7. If 'Asset management tag list' is selected in the above step, specify the
asset strip(s) whose information to send. For PX3TS with only one FEATURE
port, only one asset strip is available.
▪
To specify the asset strip(s), select them one by one from the Available
AMS Ports list. Or click Select All to add all.
▪
To remove the asset strip(s), click that asset strip's
AMS Ports field. Or click Deselect All to remove all.
8. Click Create.
9. Repeat the same steps for additional destinations. Up to 64 destinations
are supported.
To immediately push out the data:
1. On the Data Push page, choose the one whose data you want to push out.
2. Click its
To modify or delete data push settings:
1. On the Data Push page, click the one you want in the list.
2. Perform either action below.
▪
To modify settings, make necessary changes and then click Save.
▪
To delete it, click
confirmation message.
Data Push Format
Each push message contains exactly one JSON object. The data format is
formally defined in IDL files, sharing several definitions from the JSON-RPC data
model.
IDL files are available by launching
(https://help.raritan.com/json-rpc/pdu/v3.6.0/namespacedatapush.html).
To have an overview of the data format, see the following topic.
•
Sensor Log (on page 440)
•
Asset Management Tag List
•
Asset Management Tag Log
Chapter 7: Using the Web Interface
Setting Data Logging
.
, and then confirm it on the
JSON-RPC online help
(on page 443)
(on page 446)
(on page 437).
in the Selected
439