User Configuration Commands - LEGRAND Raritan PX3TS User Manual

Example - OCP Naming
The command assigns the name "Email servers CB" to the overcurrent
protector labeled 2.
config:# ocp 2 name "Email servers CB"

User Configuration Commands

Most user configuration commands begin with user except for the password
change command.
Creating a User Profile
This command creates a new user profile.
config:# user create <name> <option> <roles>
After performing the user creation command, the PX3TS prompts you to assign
a password to the newly-created user. Then:
1. Type the password and press Enter.
2. Re-type the same password for confirmation and press Enter.
Variables:
•
<name> is a string comprising up to 32 ASCII printable characters. The
<name> variable CANNOT contain spaces.
•
<option> is one of the options: enable or disable.
Option Description
enable Enables the newly-created user profile.
disable Disables the newly-created user profile.
•
<roles> is a role or a list of comma-separated roles assigned to the
specified user profile.
Chapter 9: Using the Command Line Interface
635