LEGRAND Raritan PX3TS User Manual page 501

Mechanical designs ignored by bulk configuration:
When the source and target devices share the same technical specifications but
are only different with any "mechanical designs" which are indicated in the
table below, the bulk configuration remains feasible.
These mechanical designs are represented by suffixes added to the model
name of a PX3TS device. In the table, x represents a number. For example, Ax
can be A1, A2, A3, and so on.
Suffix Mechanical design
Ax The line cord's length in meters
Note: For a PX2 or PX3 inline monitor, it is
likely two Ax's are added to the model
name for indicating the lengths of its
inlets' and outlets' line cords.
Bx The line cord's color
Cx Cord types or options
Dx Plug types or options
Ex Outlet types or options
Gx Controller options
Kx Chassis colors
Lx The line cord's length in centimeters
Nx Chassis dimensions or other mechanical
changes
Ox OCP brand options
Px Special requests for device painting or
printing
Qx Special requests for physical placement
arrangements
Ux Different power plug brands
Chapter 7: Using the Web Interface
Example
A20 = 3.3 meters
B501 = bright red
orange
C4 = power cord
with the standard
gauge
D1 = IP67
watertight plug
E2 = Locking C13 or
Locking C19
G0 = no controller
K6 = yellow
481