LEGRAND Raritan PX3TS User Manual page 173

3. To view an environmental sensor or actuator's detailed information, press
or to select that sensor or actuator, and press
Number Description
The ID number assigned to this sensor or actuator.
▪ A sensor shows "Peripheral Sensor x" (x is the ID number)
▪ An actuator shows "Peripheral Actuator x"
Sensor or actuator name.
The following information is listed.
▪ Serial number
▪ Chain position, which involves the following information:
▪
Port <N>: <N> is the number of the sensor port where this sensor or
actuator is connected. This number is always 1 for PX3TS.
▪
Chain Pos. <n>: <n> is the sensor or actuator's position in a sensor daisy
chain.
Note: Only Raritan's DX, DX2, DPX2 and DPX3 series provide the chain position
information.
▪ If this sensor or actuator is on a sensor package with multiple channels, such as
DX2-DH2C2, its channel number is indicated as "Channel x", where x is a
number.
Depending on the sensor type, any of the following information is displayed:
▪ State of a state sensor: Normal, Alarmed, Open or Closed.
▪ State of an actuator: On or Off.
▪ Reading of a numeric sensor.
X, Y, and Z coordinates which you specify for this sensor or actuator. See
Sensor/Actuator Pages
Chapter 6: Using the PX3TS
(on page 273).
.
Individual
153