Table of Contents
Advertisement
b. Click the second
the list.
c.
Click
to add the selected sensor to the Report Sensors list
box.
For example, to monitor the current reading of the Inlet 1, select Inlet 1
from the left field, and then select RMS Current from the right field.
6.
To report additional sensors simultaneously, repeat the above step to add
more sensors.
▪
To remove any sensor from the 'Report sensors' list box, select it and
click
. To make multiple selections, press Ctrl+click or
Shift+click to highlight multiple ones.
7.
To immediately send out the sensor report, click Send Report Now.
Tip: When intending to send a sensor report using custom messages, use the
placeholder [SENSORREPORT] to report sensor readings. See
Custom Messages
(on page 425).
Chapter 7: Using the Web Interface
to select the specific sensor for the target from
Placeholders for
407
Advertisement
Table of Contents
Troubleshooting
