Dpx Sensor Packages - LEGRAND Raritan PX3TS User Manual

DPX Sensor Packages

Most DPX sensor packages come with a factory-installed sensor cable, whose
sensor connector is RJ-12.
For the cabling length restrictions, see
Distances (on page 55).
Warning: For proper operation, wait for 15-30 seconds between each
connection operation or each disconnection operation of environmental
sensor packages.
To directly connect a DPX with a factory-installed sensor cable:
An RJ-12 to RJ-45 adapter is required to connect a DPX sensor package to
PX3TS.
a. Connect the adapter's RJ-12 connector to the DPX sensor cable.
b. Connect the adapter's RJ-45 connector to the RJ-45 SENSOR port of
the PX3TS.
To directly connect a differential air pressure sensor:
1. Connect a Raritan-provided phone cable to the IN port of a differential air
pressure sensor.
2. Get an RJ-12 to RJ-45 adapter. Connect the adapter's RJ-12 connector to
the other end of the phone cable.
3. Connect this adapter's RJ-45 connector to the RJ-45 SENSOR port on the
PX3TS.
Chapter 4: Connecting External Equipment (Optional)
Supported Maximum DPX Sensor
51