LEGRAND Raritan PX3TS User Manual page 711

Setting the LED Operation Mode
This command syntax determines whether a specific rack unit on the specified
asset strip follows the global LED color settings.
config:# rackUnit <n> <rack_unit> LEDOperationMode <mode>
Variables:
•
<n> is the number of the FEATURE port where the selected asset strip is
physically connected. For the PX3TS device with only one FEATURE port,
the number is always 1.
•
<rack_unit> is the index number of the desired rack unit. The index
number is available on the asset strip or the Asset Strip page of the web
interface.
•
<mode> is one of the LED modes: automatic or manual.
Mode Description
automatic This option makes the LED of the specified rack unit
follow the global LED color settings. See
Colors for Connected Tags
LED Colors for Disconnected Tags
This is the default.
manual This option enables selection of a different LED color
and LED mode for the specified rack unit.
When this option is selected, see
for a Rack Unit
Mode for a Rack Unit
LED settings.
Chapter 9: Using the Command Line Interface
(on page 689) and
(on page 690).
Setting an LED Color
(on page 692) and Setting an LED
(on page 692) to set different
Setting LED
Setting
691