LEGRAND Raritan PX3TS User Manual page 647

Enabling or Disabling Front Panel Outlet Switching
This section applies to outlet-switching capable models only.
The following CLI commands control whether you can turn on or off an outlet
by operating the front panel display.
To enable the front panel outlet control feature:
config:# security frontPanelPermissions add switchOutlet
To disable the front panel outlet control feature:
config:# security frontPanelPermissions remove switchOutlet
Tip: If your PX3TS supports multiple front panel permissions, you can combine
them into one command by adding a semicolon (;) between different
permissions. For example, the following CLI command enables both front panel
actuator control and outlet switching functions simultaneously.
security frontPanelPermissions add
switchActuator;switchOutlet
Enabling or Disabling Front Panel Actuator Control
This command applies to iX7
The following CLI commands control whether you can turn on or off connected
actuator(s) by operating the front panel LCD display.
To enable the front panel actuator control feature:
config:# security frontPanelPermissions add switchActuator
To disable the front panel actuator control feature:
config:# security frontPanelPermissions remove switchActuator
Tip: If your PX3TS supports multiple front panel permissions, you can combine
them into one command by adding a semicolon (;) between different
permissions. For example, the following CLI command enables both front panel
actuator control and the internal beeper-muting functions simultaneously.
security frontPanelPermissions add
switchActuator;muteBeeper
Chapter 9: Using the Command Line Interface
product models only.
™
627