Pdu Linking Cli Commands - LEGRAND Raritan PX3TS User Manual

PDU Linking CLI Commands

PDU List
Displays the following information for each unit:
•
Link ID
•
Communication status (for link unit only)
•
Device name
•
Model name
•
Serial number
•
Firmware version
# pdu list
Switch PDU
Switch between the master and link units. The Link ID must be PDU 1 (master)
or PDUs 2-8 (link units).
# pdu [id]
Add a New Link PDU
Add a link unit to a master unit. Only available when PDU 1 (master) is selected.
The command can be used to re-establish a connection to an existing link unit if
the Link ID and host match exactly. The command requires admin privileges
and prompts for the user's password.
# pdu link [id] [host] [login]
•
id: New link ID (PDUs 2-8)
•
host: Host name or IP address
•
login: Name of user with admin privileges
Release a Link PDU
Release a link unit from a chain until the unit becomes standalone. The master
unit does not have access to a released link unit. The command is only available
when PDU 1 (master) is selected. The command requires admin privileges, and
prompts for confirmation unless the "/y" is specified.
# pdu release [id] {/y}
•
id: Link ID of the unit to be released (PDUs 2-8).
Chapter 5: PDU Linking
107