LEGRAND Raritan PX3TS User Manual page 341

IPv4 settings:
Field/setting
Enable IPv4
IP auto configuration Select the method to configure IPv4 settings.
Preferred hostname
•
DHCP settings: Optionally specify the preferred hostname, which must
meet the following requirements:
▪
Consists of alphanumeric characters and/or hyphens
▪
Cannot begin or end with a hyphen
▪
Cannot contain more than 63 characters
▪
Cannot contain punctuation marks, spaces, and other symbols
•
Static settings: Assign a static IPv4 address, which follows this syntax "IP
address/prefix length".
Example: 192.168.84.99/24
IPv6 settings:
Field/setting
Enable IPv6
IP auto configuration Select the method to configure IPv6 settings.
Preferred hostname
•
Automatic settings: Optionally specify the preferred hostname, which
must meet the above requirements.
•
Static settings: Assign a static IPv6 address, which follows this syntax "IP
address/prefix length".
Example: fd07:2fa:6cff:1111::0/128
Chapter 7: Using the Web Interface
Description
Enable or disable the IPv4 protocol.
▪ DHCP: Auto-configure IPv4 settings via DHCP
servers.
▪ Static: Manually configure the IPv4 settings.
Enter the hostname you prefer for IPv4 connectivity
Description
Enable or disable the IPv6 protocol.
▪ Automatic: Auto-configure IPv6 settings via
DHCPv6.
▪ Static: Manually configure the IPv6 settings.
▪ Enter the hostname you prefer for IPv6
connectivity
321