LEGRAND Raritan PX3TS User Manual page 622

Chapter 9: Using the Command Line Interface
602
Enabling or Disabling the Read-Only Mode
This command enables or disables the read-only mode for the Modbus agent.
config:# network services modbus readonly <option>
Variables:
•
<option> is one of the options: true or false.
Option Description
true The read-only mode is enabled.
false The read-only mode is disabled.
Changing the Modbus Port
This command changes the Modbus port.
config:# network services modbus port <n>
Variables:
•
<n> is a TCP port number between 1 and 65535. The default Modbus port
is 502.
Enabling or Disabling Service Advertising
This command enables or disables the zero configuration protocol, which
enables advertising or auto discovery of network services. See
Advertising (on page 347) for details.
config:# network services zeroconfig <method> <option>
Variables:
•
<method> is one of the options: mdns or llmnr.
Option Description
mdns Service advertisement via MDNS is enabled or
disabled.
Service advertisement via LLMNR is enabled or
llmnr
disabled.
Enabling Service