LEGRAND Raritan PX3TS User Manual page 337

Field/setting Description
Click this button to import a certificate file. Then you
can:
▪ Click Show to view the certificate's content.
▪ Click Remove to delete the installed certificate if it
▪ Select this checkbox to make the authentication
Allow expired and
not yet valid
certificates
▪ After deselecting this checkbox, the authentication
Allow connection if When this checkbox is deselected, and if the system
system clock is time is incorrect, the installed TLS certificate is
incorrect considered not valid yet and will cause the wireless
network connection to fail.
When this checkbox is selected, it will make the
wireless network connection successful when the
PX3TS system time is earlier than the firmware build
before synchronizing with any NTP server.
▪ The incorrect system time issue may occur when
Wireless Network Settings
If the device's cascading mode is set to 'Bridging' or its role is set to 'Slave' in
the port forwarding mode, the wireless settings will be disabled. See
the Cascading Mode (on page 328).
By default the wireless interface is disabled. You should enable it if wireless
networking is wanted.
On the Network page, click the WIRELESS section to configure wireless and
IPv4/IPv6 settings.
Interface Settings:
Field/setting
Enable interface
is inappropriate.
succeed regardless of the certificate's validity
period.
fails whenever any certificate in the selected
certificate chain is outdated or not valid yet.
the PX3TS has once been powered off for a long
time.
Description
Enable or disable the wireless interface.
When disabled, the wireless networking fails.
Chapter 7: Using the Web Interface
Setting
317