LEGRAND Raritan PX3TS User Manual page 279

•
Go to an individual sensor's or actuator's data/setup page by clicking its
name.
If wanted, you can resort the list by clicking the desired column header. See
Sorting a List (on page 179).
Sensor/actuator overview on this page:
If any sensor enters an alarmed state, it is highlighted in yellow or red. See
Yellow- or Red-Highlighted Sensors
highlighted.
Column Description
Name By default the PX3TS assigns a name comprising the
following two elements to a newly-managed
sensor/actuator.
▪ Sensor/actuator type, such as "Temperature" or "Dry
Contact."
▪ Sequential number of the same sensor/actuator
type, like 1, 2, 3 and so on.
You can customize the name. See
Sensor/Actuator Pages
Reading Only managed 'numeric' sensors show this data, such as
temperature and humidity sensors.
The data is available for all sensors and actuators. See
State
Sensor/Actuator States
Type Sensor or actuator type.
Serial Number This is the serial number printed on the sensor package's
label. It helps to identify your Raritan sensors/actuators.
See Finding the Sensor's Serial Number
Chapter 7: Using the Web Interface
(on page 264). An actuator is never
Individual
(on page 273).
(on page 267).
(on page 268).
259