▪
Type the hexadecimal RGB value of the color, such as #00FF00.
3.
Click Ok. The rack unit numbering and LED color settings are immediately
updated on the Rack Units list illustrated below.
▪
The 'Index' number is the physical tag port number printed on the
asset strip, which is not configurable. However, its order will change to
reflect the latest rack unit numbering.
▪
A blade extension strip and a programmable tag are marked with the
word 'programmable' in the Asset/ID column. You can customize their
Asset IDs. For instructions, refer to this section's last procedure below.
▪
If wanted, you can resort the list by clicking the desired column header.
See
Sorting a List
(on page 179).
Chapter 7: Using the Web Interface
283