Sensor types
all
Displayed information:
•
Without the parameter "details," only the default upper and lower
thresholds, deassertion hysteresis and assertion timeout settings of the
specified sensor type are displayed.
•
With the parameter "details," the threshold range is displayed in addition
to default thresholds settings.
Security Settings
This command shows the security settings of the PX3TS.
#
show security
To show detailed information, add the parameter "details" to the end of the
command.
#
show security details
Displayed information:
•
Without the parameter "details," the information including IP access
control, role-based access control, password policy, and HTTPS encryption
is displayed.
•
With the parameter "details," more security information is displayed, such
as user blocking time, user idle timeout and front panel permissions (if
supported by your model).
Chapter 9: Using the Command Line Interface
Description
All of the above numeric sensors
Tip: You can also type the command without
adding this option "all" to get the same data.
549