LEGRAND Raritan PX3TS User Manual page 177

4. Press to show the Network Cascading page.
Number Description
Cascading status, which can be one of the following:
▪ No Cascading: This device's cascading mode is set to None. See
Cascading Mode
▪ Network Bridge Enabled: This device's cascading mode is set to Bridging. Its IP
address is also displayed on this page.
▪ Port Forwarding Master: This device's cascading mode is set to Port Forwarding,
and it is a master device.
▪
Slave Connected: Indicates whether the presence of a slave device is
detected - yes or no.
▪ Port Forwarding Slave: This device's cascading mode is set to Port Forwarding,
and it is a slave device.
▪
Slave Connected: Indicates whether the presence of a slave device is
detected - yes or no.
▪
Cascade Position: Indicates the position of a slave device in the Port
Forwarding mode. 1 represents Slave 1, 2 represents Slave 2, and so on.
▪
A port forwarding slave device will also display the master device's IP
address on this page.
5. Press to show the Ethernet pages.
Chapter 6: Using the PX3TS
(on page 328).
Setting the
157