LEGRAND Raritan PX3TS User Manual page 197

Menu Information shown
OCPs
OCP status and settings, such as OCP thresholds.
See
Peripherals Status and settings of Raritan environmental sensor packages, if connected.
See
Feature Port Status and settings of the device connected to the Feature port(s), which can be
one of the following.
The name 'Feature
▪ Asset Strip
Port(s)' will be
▪ External Beeper
replaced with one
▪ LHX 20
of the device
▪ SHX 30
names listed to
▪ LHX 40
the right
▪ Power CIM
See
Webcams
Webcam live snapshots/video and webcam settings.
See
SmartLock
-- and/or --
Card Readers
▪ SmartLock: Configures and controls the door handles connected to this product
▪ Card Readers: Lists the card readers connected to PX3TS directly or indirectly.
See
User Management Data and settings of user accounts and groups, such as password change.
See
Device Settings Device-related settings, including network, security, system time, event rules and
more.
See
The OCPs menu item displays only when there are overcurrent protectors
implemented on your model.
OCPs (on page 249).
Peripherals (on page 258).
Feature Port (on page 279).
The 'Webcams' menu item appears when there is any webcam(s) connected to
the PX3TS, or when there are snapshots saved onto the PX3TS already.
Webcam Management
Either or both menu items appear only when you connect Raritan's SmartLock
kit to this product. For details, refer to the user documentation accompanying
the SmartLock kit or download it from Raritan's
(http://www.raritan.com/support/).
via DX2-DH2C2. Note that this page is not available if connecting the door
handles to other Raritan sensors than DX2-DH2C2.
SmartLock and Card Reader
User Management (on page 296).
Device Settings (on page 308).
(on page 493).
Support page
(on page 506).
Chapter 7: Using the Web Interface
177