Environmental Sensor Package Information - LEGRAND Raritan PX3TS User Manual

Chapter 9: Using the Command Line Interface
542
* The environmental sensor number is the ID number assigned to the sensor,
which can be found on the Peripherals page of the PX3TS web interface.
Displayed information:
•
Without the parameter "details," only the sensor ID, sensor type and
reading are displayed.
Note: A state sensor displays the sensor state instead of the reading.
•
With the parameter "details," more information is displayed in addition to
the ID number and sensor reading, such as the serial number, sensor
position, and X, Y, and Z coordinates.

Environmental Sensor Package Information

Different from the "show externalsensors" commands, which show the
reading, status and configuration of an individual environmental sensor, the
following command shows the information of all connected environmental
sensor packages, each of which may contain more than one sensor or actuator.
# show peripheralDevicePackages
Information similar to the following is displayed. Peripheral Device Package
refers to an environmental sensor package.
Peripheral Device Package 1
Serial Number:
Package Type:
Position:
Package State:
Firmware Version: 33.0
Peripheral Device Package 2
Serial Number:
Package Type:
Position:
Package State:
Firmware Version: 33.0
1GE7A00022
DX2-T1H1
Port 1, Chain Position 1
operational
1GE7A00021
DX2-T3H1
Port 1, Chain Position 2
operational