Chapter 3: Initial Installation and Configuration
38
Power-Sharing Configurations and Restrictions
When either PX3TS PDU enters the power-sharing mode, BOTH PDUs involved
in the power-sharing connection support "less" external equipment than usual.
It is strongly recommended to remove specific equipment from both PX3TS
PDUs when making a power-sharing connection.
Configuration limitations on "both" PDUs:
•
NO USB wireless LAN adapter is connected.
That is, you have to connect both PDUs to a "wired" network if LAN access
is wanted.
•
No asset management strips can be connected simultaneously.
•
The maximum number of DX environmental sensor packages or door
handles that can be connected decreases. For details, see
Sensor Configurations for Power Sharing
•
After either PDU enters the power-sharing mode, you must NOT physically
remove or add any environmental sensor packages to BOTH PDUs.
Supported
(on page 39).