Bulk Configuration - LEGRAND Raritan PX3TS User Manual

2. If wanted, you can resort the list by clicking the desired column header.
See Sorting a List (on page 179).

Bulk Configuration

The Bulk Configuration feature lets you save generic settings of a configured
PX3TS device to your computer. You can use this configuration file to copy
common settings to other PX3TS devices of the same model and firmware
version. See Bulk Configuration Restrictions
A source device is the PX3TS device where the configuration file is
downloaded/saved. A target device is the PX3TS device that loads the
configuration file.
By default the configuration file downloaded from the source device contains
settings based on the built-in bulk profile. The built-in bulk profile defines that
all settings should be saved except for device-specific settings.
You can decide which settings are downloaded and which are not by creating
your own bulk configuration profile.
Note that "device-specific" settings, such as the device's IP address or
environmental sensor settings, will never be included into any profile you will
create so they will never be downloaded from any source device. See
Device-Specific Settings (on page 858).
When the date and time settings are included in the bulk configuration file,
exercise caution when distributing that file to target devices located in a
different time zone than the source device.
Tip: To back up or restore "all" settings, including device-specific ones, use the
Backup/Restore feature instead. See
page 486).
Main bulk configuration procedure:
1. If you prefer customizing the bulk configuration file, create your own bulk
configuration profile(s) first. See
(on page 482).
2. Perform the bulk configuration operation, which includes the following
steps. For details, see
a. Make sure the desired bulk configuration profile has been selected on
the source device.
b. Save a bulk configuration file from the source device.
c. Perform bulk configuration on one or multiple target devices.
(on page 480).
Backup and Restore of Device Settings
Customizing Bulk Configuration Profiles
Performing Bulk Configuration
Chapter 7: Using the Web Interface
(on page 483).
(on
479